QuadStar Elite Digital Multi Modalitiy Combo Device

Alternative Views:

The QuadStar Elite is a four channel (up to 8 electrodes) TENS, NMS, High-Volt and Interferential stimulator all in one portable combination unit. Requires prescription.

Price: $1,521.75

Product Code: KQSE

Qty:

Description

Specs & Manuals

The QuadStar Elite is a four channel (up to 8 electrodes) TENS, NMS, High-Volt and Interferential stimulator all in one portable combination unit. It’s ergonomic design has a compact size, user friendly interface, LCD screen and digital keyboard that make programming the unit very easy. The user can sequence two or more modalities for complete treatment.

Send prescription to one of the following:

Fax: (678) 379-2337
Email: custserv@novo-supply.com

General Specs

Weight:	18.5 oz (574 g)
Power Supply:	Internal Battery P/N QSE 601 NiCad Battery Pack; External Specified Power Supply: P/N L60071 Medical Grade Power Supply.
Channels:	(4) for INF, NMS, and TENS (2) Active (red) & (1) Dispersive (black) for High Voltage
Electrodes/Leadwires:	(4) Lead Wires - Style L00013MC (2) GV0014R (red single wires) and (1) GV0014B (Black single wire)
Tolerance:	+/- 1%

INF Specs

Waveform:	Continuous Sinusoidal
CH1/CH3 (Carrier) Frequency:	4000 Hz
CH2/CH4 Frequency:	4001-4150 Hz adjustable
Beat Frequency:	1-150 Hz
	CH1/CH2 are an Interferential Pair
	CH1: Fixed Frequency (4000 Hz)
	CH2: Adjustable 4001-4150 Hz
	CH3/CH4 are an Interferential Pair
	CH3: Fixed Frequency (4000 Hz)
	CH4: Adjustable 4001-4150 Hz
Premodulated INF (Using one Channel):	A mixed Interferential Beat Frequency will be produced only out of CH 1 and/or CH 3.
Modes:	Constant Stimulation Alternating Stimulation Cycled Stimulation
Constant:	Beat Frequency is adjustable from 1-150 Hz
Sweep 1:	Beat Frequency Modulates from 1-10 Hz and back over 12 seconds (6 second increase, 6 second decrease)
Sweep 2:	Beat Frequency Modulates from 80-150 Hz and back over 16 seconds (8 second increase, 8 second decrease)
Sweep 3:	Beat Frequency Modulates from 1-150 Hz and back over 20 seconds (10 second increase, 10 second decrease.
Intensity:	0-78 milliamps peak to peak
Output Voltage:	0-39 Volts peak to peak

NMS Specs

Waveform:	Symmetrical, biphasic, square Asymmetrical, biphasic, square
Pulse Rate:	Adjustable 1-120 Hz peak to peak
Pulse Width:	Adjustable 50-400 uS
On Ramp:	0-10 seconds
On Time:	0-99 seconds
Off Ramp:	0-10 seconds
Off Time:	0-99 seconds
Modes:	Constant: Use the Constant Mode or a Pulse Rate greater than 60 Hz. for the relaxation of muscle spasms only. Use of continuous stimulation and/or rates above the normal physiological range (e.g., greater than 60 Hz) could lead to rapid onset of muscle fatigue, making the device less effective in producing repeated forceful muscle contractions.
	Cycled
	Reciprocating
Intensity:	0 - 120 mA from peak to peak (adj)Mo
Voltage:	0- 60 volts from peak to peak (adj.)

TENS Specs

Waveform:	Asymmetrical Biphasic Square
Pulse Rate:	Adjustable 1-120 Hz
Pulse Width:	Adjustable 10-250 µS
Modes:	Constant Pulse Rate (Hz) is adjustable from 1-120 Hz and Pulse Width (µS) is adjustable from 10-250 µS.
	Pulse Width Modulation: Decrease/Increase of set width 50% over 5 second cycle.
	Pulse Rate Modulation: Decrease/Increase of set width 50% over 5 second cycle.
	Pulse Width & Pulse Rate Modulation: Pulse Rate and Pulse Width alternately decrease and increase 50% of their set values over 5 seconds cycle.
	Strength Duration 1: Increase of set Pulse Width 40%, decrease of set Pulse Rate 45% and decrease of Amplitude 10% over a 3 second period. Values return to original settings over the next 3 second period.
	Strength Duration 2: Increase of a set Pulse Width 60% decrease of set Pulse Rate 90% and decrease of set Amplitude 13% over a 6 second period. Values return to original setting over the next 6 seconds.
	Cycled Burst (B1): 2.5 seconds on, 2.5 seconds off. Adjust able Pulse Rate 1-200 Hz. Adjustable Pulse Width from 10-250 μs.
	Cycled Burst II (B2): 8 pulses per 0.25 seconds, off for 0.25 seconds. Adjustable Pulse Width from 10-250 μs.
Intensity:	0-100 mA peak to peak
Voltage:	0-50 Volts peak to peak

High Volt Specs

Waveform:	Pulsed galvanic twin peak monophasic delivered in pairs
Channels:	2 active outputs 1 dispersive return
Output Voltage:	0 - 350 volts adjustable
Output Current:	0 - 700 mA peak, Adjustable
Pulse Width:	Inter pulse intervals of 100 (μS) ,fixed.
Pulse Rate:	1 - 120 Hz, adjustable
Modes:	Constant Stimulation Alternating Stimulation Cycled Stimulation
Polarity Switch:	Positive/Negative polarity of active electrodes (A1 & A2)
Ramp On:	0-10 seconds
On Time:	0-99 seconds
Ramp Off:	0-10 seconds
Off Time:	0-99 seconds

Features

Nine pre-programmed protocols and four types of waveforms;
- Symmetrical Biphasic Square Wave
- Asymmetrical Biphasic Square Wave
- Sine Wave;
- Monophasic High-Volt
- Twin Peak
User can sequence two or more modalities for complete treatment.
Patient Lock System prevents the changing any of the set parameters.
Patient Compliance Meter displays how long the device was used.
Device Timer allows the patient to use the device for a specified period of time.
Device includes:
- Rechargeable NICAD battery pack
- Wall adaptor
- Lead Wires
- Electrodes
- Carry Case
- Instruction Booklet
Requires Prescription

Share your knowledge of this product. Be the first to write a review »